Network Enhancers - "Delivering Beyond Boundaries" Headline Animator

Showing posts with label SDN. Show all posts
Showing posts with label SDN. Show all posts

Wednesday, January 13, 2016

Huawei Threatens Cisco With Application Driven Networking


Huawei is pointing a gun straight at Cisco with a new strategy it's calling Application Driven Networking (ADN), designed to give comms networks the flexibility required for New IP applications.

Huawei Technologies Co. Ltd. announced its Application Driven Networking (ADN) without a lot of fanfare early last month. It sounds at first like a "me too" strategy that copies Cisco's similarly named Application Centric Infrastructure (ACI). (See Huawei Unveils Application-Driven Network Vision.)

But ADN is more than just a marketing campaign, as Ayush Sharma, senior VP and IP CTO for Huawei, explains it. It's an architecture that uses 5G principles to build networks with the flexibility needed for the different requirements of traditional voice, Internet and machine-to-machine communications.

While Cisco is building a virtual network overlay on top of MPLS and other traditional network components, Huawei is using open source, SDN, NFV and the 5G principles of network slicing to build programmable, network-agnostic networks on top of any media, including copper, fiber and wireless and LTE, Sharma tells Light Reading.

Carriers need to go beyond the old, simplistic definition of five-nines of reliability to meet the different demands of different kinds of applications, Sharma says.

For example, traditional voice networks follow the "Poisson distribution model," Huawei Fellow Wen Tong said in a statement. "Poisson Distribution" is a statistical model -- what it means for comms companies is that phone calls are likely to remain at a constant frequency and duration over time. This model is suitable for a hierarchical network architecture.

Internet communications follow a power-law distribution model, where most users are connected to central nodes.

And machine-to-machine communications comprises many different cases with greatly varying needs. For example, communications between connected cars requires extremely low latency. "In telemedicine, remote video systems require ultra-wide bandwidth, low latency and high reliability," Huawei says. "In this case, networks must create small systems locally and huge systems globally. The Markov distribution model supports network architecture with both distributed and centralized controls." (See How IoT Forked the Mobile Roadmap.)

These principles -- flexibility, applications driving technology and use of open components -- are hallmarks of New IP networks.

Huawei achieves the network flexibility required for the new generation of apps by dividing the network logically into the data plane, control plane and the services plane, where third-party applications such as the connected car, robotic surgery and drone control systems reside.

On the data plane (also known as the forwarding plane) the network uses programming languages such as Huawei's own Protocol Oblivious Forwarding, which is compatible with the industry standard P4, as well as OpenFlow, to forward traffic.

On the control plane, Huawei uses open protocols from ON.Lab 's ONOS andOpenDaylight to manage devices.

On the services plane, applications don't need to know anything about the underlying network complexity.


"Earlier, these kinds of things were vertically integrated into a box," says Sharma. A router contained forwarding, control and some network applications. Now the forwarding and control plane are separate devices built using standardized components and the applications reside anywhere on the network.

An example of Huawei's ADN in action is AT&T Inc. (NYSE: T)'s Central Office Re-architected as Data Center (CORD), a scalable, white-box architecture designed to deliver services more economically than the current central office set-up, incorporating multiple single-function boxes. Huawei is partnering with AT&T on CORD. (See AT&T to Show Off Next-Gen Central Office and Ciena Offers Hardened ONOS for Next-Gen Central Office Conversions.)

For another example, a connected car needs to be able to receive software upgrades, bug fixes and send reports from sensors. "They don't care whether it's over a fixed connection, WiFi, SDN or NFV. They need to be connecting, need a certain QoS, they don't care about implementation," Sharma says.


Sunday, September 27, 2015

Microsoft Azure Builds Its Own Networking OS For Switches


Microsoft has developed a new networking OS, Azure Cloud Switch (ACS), that will give it a say in how data center switches operate.

It’s “a cross-platform modular operating system for data center networking,” writes Kamala Subramanian, principal networking architect for Microsoft Azure, in a recent company blog.

Linux-based ACS is Microsoft’s first foray into offering its own SDN-like software for running network devices such as switches. It came about because cloud and enterprise networks are challenged by the task of integrating “different software running on each different type of switch into a cloud-wide network management platform,” Subramanian writes.

“Ideally, we would like all the benefits of the features we have implemented and the bugs we have fixed to stay with us, even as we ride the tide of newer switch hardware innovation,” she writes.

ACS allows Microsoft to share the same software stack across multiple switch vendors. Other benefits include the ability to scale down the software while developing features that are required for data center and networking needs, as well as debug, fix, and test software bugs at a faster rate.

A cynic might view ACS as Microsoft’s attempt to get commercial switches to behave the way it wants. Subramanian explains it this way: “We believe there are many excellent switch hardware platforms available on the market, with healthy competition between many vendors driving innovation, speed increases, and cost reductions.”

ACS was designed using the Switch Abstraction Interface (SAI) specification, which is an Open Compute Project (OCP) standard that has an API for programming network-switch chips. Microsoft is a founding member of SAI and continues to be a major contributor. In July, the SAI specification was officially accepted by OCP as a standardized C API to program ASICs.

Microsoft put its ACS through its paces publicly at the SIGCOMM conference in August. The ACS was demonstrated with four ASIC vendors (Mellanox, Broadcom, Cavium, and the Barefoot Networks software switch), six implementations of SAI (Broadcom, Dell, Mellanox, Cavium, Barefoot, and Metaswitch), and three applications stacks (Microsoft, Dell, and Metaswitch.)

In her blog, Subramanian endorses the trend of separating switch software from switch hardware as part of a growing trend in the networking industry, and “we would like to contribute our insights and experiences of this journey starting here.”


Monday, March 30, 2015

Top 10 SDN and NFV Directory Products – Feb. 2015





Feb. ’15 ProductRank Last Month & Peak

 10

Nuage Virtualized Services Controller (VSC)
Nuage kicks off our list with its first appearance (well, since we started last month.) Could it be theJanuary Webinar Q&A that brought the VSC here? No, that webinar covered the VNS, making this first entry of the VSC that much more impressive.
Last Month: –
Peak: 10

 9

HP Virtual Application Networks (VAN) SDN Controller
HP‘s SDN controller moved up a spot. Though its controller didn’t make the news, HP sure did. HP launched a new line of branded white box switches and also launched the HP Networking Channel on SDxCentral. Could explain the jump.
Last Month: 10
Peak: 9

 8

Cisco Application Policy Infrastructure Controller (APIC)
Back at No. 8, a spot up from last month, the Cisco APIC continues to interest readers and customers. It must be SDxCentral’s page,What is Cisco APIC? Could also be the fact that two of the top ten biggest stories last month, onCisco claiming to be serious about open source and how it’s ready to fight VMware, had readers interested in Cisco products.
Last Month: 9
Peak: 8

 7

Dell S-Series S4810 High-Performance 10-/40-Gb/s Top-of-Rack Switch
Sitting at No. 7 for three months in a row, the Dell S-Series S4810 doesn’t want to budge from its spot. What’s interesting is Dell hasn’t had any big breaking news on SDxCentral’s feed since November (not including mentions.)
Last Month: 7
Peak: 7

 6

Juniper Contrail
Juniper Contrail drops two spots from last month. It’s still bouncing around in the middle. February certainly hasn’t been shy of Juniper news with Craig Matsumoto’s exclusive on why Juniper ousted CEO Shaygan Kheradpir and our two breaking news stories last week, Jim Dolce’s return and how Juniper isbringing open source to its NFV story.
Last Month: 4
Peak: 4

 5

VMware NSX
VMware NSX moves up. Will it catch its peak again? The three breaking news stories within a week of each other may explain this little jump: the latest NSX tally,VMware mixing NSX and vCloud Air, and VCE adopting VMware NSX.
Last Month: 6
Peak: 4

 4

Huawei U2000 Network Management System (NMS)
U2000 NMS wasn’t in the news, but Huawei was for the first time since June 2014. Did it take Justin Dustzadeh joining Visa to help NMS reach the number four spot? Probably not, but it did spike interest in Huawei on SDxCentral. See the connection I’m making there?
Last Month: 5
Peak: 4

 3

The Cisco Extensible Network Controller (XNC)
How often do you type in XNC in your favorite search engine?Cisco did a DemoFriday way back in 2013 on the XNC, and it’s still snagging the No. 3 spot for the third month in a row. If your wondering what the XNC is, check out SDxCentral’s What is a Cisco XNC?
Last Month: 3
Peak: 3

 2

EstiNet 8.1 OpenFlow Network Simulator and Emulator
Planting itself at No. 2 for the second month in a row, this simulator and emulator supports OpenFlow, so maybe that’s what piques interest.
Last Month: 2
Peak: 2

 1

Virtual CPE (vCPE) Framework
At No. 1 for the third month in a row. Why so many clicks? As with last month, I’d have to go with theDemoFriday and resulting Q&Athat Aricent rocked back in December. Or perhaps it’s due to strong interest in vCPE as a whole resulting in searches that land here due to the awesome SEO value products get in our directory.
Last Month: 1
Peak: 1



Saturday, March 28, 2015

Understanding NFV in 6 videos


If the adage says a picture is worth a thousand words, then a video should worth a million. In today’s post I offer you a quick way to fully understanding Network Functions Virtualization (NFV), Software Defined Networking (SDN), and some of its related trends through six short videos, ranging from the very basics of virtualization and cloud concepts, to the deepness of today’s architecture proposed for the NFV installations.

What “the heck” are virtualization and cloud about?

A short and self-explanatory video from John Qualls, President and CEO of Bluelock, covering the very basics of data centres transition towards virtualized models.



What is the difference between NFV and SDN?

This great summary from Prayson Pate, Chief Technologist at Overture Networks, highlights the differences and similarities between NFV and SDN, and how are these complemented in the telecoms industry.



Let us talk about the architecture

Now the basics are established we can see the overall architecture. Look at these diagrams from HP and Intel where they show the main components involved.








So, wait a minute, what is that thing they call OpenFlow?

The following video from Jimmy Ray Purser, Technical host for Cisco TechWise and BizWise TV, explains OpenFlow in a quick and straight way.




What about OpenStack?

This piece from Rackspace, featuring Niki Acosta & Scott Sanchez, makes a great summary about OpenStack, its origin, and its situation in the industry.





Now, what are the challenges faced and some real cases for the carriers?

Now that the concepts are clear and defined, we can study a couple of real use cases scenarios in the carriers’ network and its architecture, as well as methods for addressing the challenges faced in the NFV evolution. In the following video Tom Nolle, Chief Architect for CloudNFV, presents Charlie Ashton VP Marketing and US Business Development at 6Wind, and Martin Taylor CTO at Metaswitch Networks, covering some use cases like the Evolved Packet Core (EPC) and the Session Border Controllers (SBC) based on NFV.


Wrapping up, where are the vendors and the operators at with NFV?

The following pitch features Barry Hill, VP Sales & Marketing from Connectem Inc., at the IBM Smart Camp 2013 hosted in Silicon Valley. It covers a summary of the market opportunity for NFV, their specific solution for the operators EPC, and a brief check on the carriers’ status with it.




Although the ETSI ISG group for NFV definition will most likely publish the standards for it in one year from now, it is already a reality, and all the vendors and operators are working on it in some way or another. No matter if you are just starting to explore this trend, or mastering it already, I hope these videos gave you something about it you did not know before.




Thursday, March 12, 2015

Cisco ACI CLI Commands "Cheat Sheet"



Introduction
The goal of this document is to provide a concise list of useful commands to be used in the ACI environment. For in-depth information regarding these commands and their uses, please refer to the ACI CLI Guide.

Please note that legacy style commands (show firmware, show version, etc) will not be included in this guide. The below commands are new for ACI. Legacy commands may be added later on, but the point of this document is to be short and sweet.

Formatting
This document is formatted in the following way: commands are surrounded by <> in bold and possible user-given arguments within commands (if necessary) are surrounded by () with a | in between multiple arguments. Brackets [] will be used for mandatory verbatim arguments. A dash (-) will be the barrier between a command and the explanation for a command. For example:

     - shows the status of a given interface as well as statistics
        interface ID is in () because it is a user-specified argument, you can put any interface you want

     - show the MAC port status
        ns|alp and 0|1 are in brackets because you must use either one of those arguments

Command Completion and Help
Context sensitive help and command completion in ACI is a bit different than in other command line interfaces from Cisco.  Since iShell builds mostly on Bash, these features tend to build off of the standard bash Programmable Completion feature.  

  • Tab - Use the tab key to auto complete commands.  In cases where there are multiple commands that match the typed characters, all options should be displayed horizontally.  

    Example Usage:

     
    admin@tsi-apic1-211:~> mo
    moconfig     mocreate     modelete     modinfo      modprobe     modutil      mofind       moprint      more         moset        mostats      mount        mount.fuse   mount.nfs    mount.nfs4   mountpoint   mountstats   mount.tmpfs
    admin@tsi-apic1-211:~> mo

    This is more than just iShell, it includes all Bash commands.  Hitting Tab before typing any CLI command on the APIC results in:
     
    admin@tsi-apic1-211:~> 
    Display all 1430 possibilities? (y or n)
  • Esc Esc - Use Double escape to get context sensitive help for available ishell commands.  This will display short help for each command.  [Side note: In early beta code, Double Escape after typing a few characters would only show one of the matching commands rather than all of them.  This is addressed via CSCup27989 ]

    Example Usage:

     
    admin@tsi-apic1-211:~> 
     attach           Show a filesystem object
     auditlog         Display audit-logs
     controller       Controller configuration
     create           create an MO via wizard
     diagnostics      Display diagostics tests for equipment groups
     dn               Display the current dn
     eraseconfig      Erase configuration, restore to factory settings
     eventlog         Display event-logs
     fabricnode       Commission/Decommission/Wipeout a fabric node
     faults           Display faults
     firmware         Add/List/Upgrade firmware
     health           Display health info
     loglevel         Read/Write loglevels
     man              Show man page help
     moconfig         Configuration commands
     mocreate         Create an Mo
     modelete         Delete an Mo
    [snip]
    admin@tsi-apic1-211:~>
  • man  - All commands should have man pages.  [Side note: If you find an iShell command without a man page - open a bug]  The manual page for the commands will give you more detailed info on what the commands do and how to use them.

Cisco Application Centric Infrastructure CLI Commands (APIC, Leaf/Spine)


Clustering User Commands
 - shows the current cluster size and state of APICs
- changes the size of the cluster
 - Decommissions the APIC of the given ID
 - Factory resets APIC and after reboot will load into setup script
 - Reboots the APIC of the given ID
 - shows replica which are not healthy
 - shows the state of one replica
 - large output which will show cluster size, chassisID, if node is active, and summary of replica health
 - shows fabric node vector
 - shows appliance vector
 - verifies APIC hardware
 - shows link status
 - shows the status of bond link
 - shows dhcp client information to confirm dhcp address from APIC
 - commissions, decommissions, or wipes out given node. wipeout will completely wipeout the node including configuration. Use sparingly.

SSL Troubleshooting
 - tries to connect ssl between APIC and Node and gives output of SSL information
 -shows logging of DME-logs for node
 - shows policy-element logs for SSL connectivity
Can also check logs in the /var/log/dme/log directory

Switch Cert Verification
 - Next to PRINTABLESTRING, it will list Insieme or Cisco Manufacturing CA. Cisco means new secure certs are installed, Insieme means old unsecure are installed
- Shows start and end dates of certificate. Must be within range for APIC to accept
- Shows keypairs of specified cert

Switch Diagnostics
 - shows bootup tests and diagnostics of given module
 - shows ongoing tests of given module
 - shows diagnostic result of given module or all modules
 - shows diagnostic result of given test on given module
 - show debug information for the diagnostic modules

Debug Commands
 - shows debug output of given argument
 - enables/disables given argument on all modules
 - gets the interval of given argument
 - EPC mon statistics
 - EPC mon statistics
 - EOBC/EPC switch status (0: EOBC, 1: EPC)
 - SC card broadcom switch status

Insieme ELTM VRF, VLAN, Interface Commands
 - dumps ELTM trace to output file
 - dumps eltm trace to console
 - shows vrf table of given vrf
 - 
 - 
 - vrf summary, shows ID, pcTag, scope
 - shows vlan information. Can substitute (brief) for a vlan ID
 -

OSPF CLI Commands
 - shows OSPF neighbors of given vrf
 - shows OSPF routes of given vrf
 - shows ospf interfaces of given vrf
 - shows ospf information of given vrf
 - shows ospf traffic of given vrf

External Connectivity
 - shows arp entries for given vrf
 - shows ospf neighbors for given vrf
 - shows bgp sessions/peers for given vrf
 - shows ospf routes for given vrf
 - shows bgp unicast routes for given vrf
 - shows static routes for given vrf
 - shows routes for given vrf
 - shows external LPMs
 - shows next hops towards NorthStar ASIC or external router
 - HigigDstMapTable Indexed using DMOD/DPORT coming from T2. Provides a pointer to DstEncapTable. 
 - DstEncapTable Indexed using the HigigDstMapTable’s result. Gives tunnel forwarding data.
 - RwEncapTable Indexed using the HigigDstMapTable’s result. Gives tunnel encap data.

ISIS Fabric Unicast Debugging
 - shows ISIS statistics
 - shows ISIS adjacencies for given vrf. Can also add detail
 - shows lldp neigbor status
 - shows interface status information and statistics
 - shows isis database, can also add detail
 - shows isis route information
 - shows isis traffic information
 - shows all discovered tunnel end points
 - shows isis statistics of given vrf
 - shows isis event history
 - shows isis memory statistics
 - provides isis tech-support output for TAC

ASIC Platform Commands
 - shows the MAC port status
 - shows the MAC port counters
 - shows ASIC block counters for given ASIC. Can also add [detail] for more details
 - shows interrupts for given ASIC

ASIC Platform Commands - T2 Specific
 - shows receive counters for T2
 - shows transmit counters for T2
 - shows per port packet type counters
 - shows ingress drop counters
 - shows egress drop counters
&  - setting register to specific trigger. 9 registers per port (0-8)
    ex -   - sets 4th register to select RFILDR selector (bit 13)
 - checking the stats for above command

ASIC Platform Commands - NS Specific
 - shows port counters
 - shows internal port counters
 - shows vlan counters
 - shows per-tunnel counters
 - shows ASIC block counters
 - shows well-defined tables

Fabric Multicast - General
 - shows currecnt state of FTAG, cost, root port, OIF list
 - shows GM-LSP database
 - shows GIPO routes, Local/transit, OIF list
 - shows topology and compute stats, MRIB update stats, Sync+Ack packet stats, Object store stats
 - shows isis multicast event history logs
 - more detailed than above command, specifically dealing with forwarding events and forwarding updates

Fabric Multicast Debugging - MFDM
 - flood/OMF/GIPi membership
 per BD

 - GIPi membership
 - specific
 - per BD
 - specific per BD

 - flood membership
 - per BD

 - OMF membership
 - per BD

 - IPMC membership 
 - specific IPMC



Fabric Multicast Debugging - L2 Multicast
 - flood/OMF/GIPi membership
 - per BD

 - GIPi membership
 - specific
 - per BD
 - specific per BD

 - flood membership
 - per BD

 - MET membership
 - specific MET
 - flood MET
 - GIPi MET
 - per BD
 - specific per BD
 - IPMC membership
 - specific IPMC

Fabric Multicast Debugging - MRIB
 - shows IP multicast routing table for given vrf

Fabric Multicast Debugging - MFIB
 - shows FTAGs
 - shows GIPO routes

Fabric Multicast Debugging - IGMP
 - shows multicast route information in IGMP
 - shows multicast router information IGMP
 - FD to BD vlan mapping. IGMP gets FD and G from Istack. It needs to know the BD to create (BD, G)
 - verify BD membership of a port in IGMP. Only when ports are part of BD joins are processed
 - verify the tunnel to IF mapping in IGMP. IGMP uses this to get the groups on VPC and only sync them.

Fabric Multicast Debugging - MFDM
 - shows IPv4 multicast routing table for given vrf
 - Verify FD to BD vlan mapping. MFDM gets (FD,port) memberships from vlan_mgr and uses this information go create BD floodlists.
 - BD to GIPO mapping. GIPO is used by Mcast in Fabric
 - FD-vxlan to GIPO mapping
 - tunnel to phy mapping

Fabric Multicast Debugging - M2rib
 - shows multicast route information in M2rib
 - shows multicast route informatino in M2rib

Fabric Multicast Debugging - PIXM
 - RID to IPMC mapping. IFIDX is RID and LTL is IPMC

Fabric Multicast Debugging - VNTAG Mgr
 - IPMC to DVIF mapping. LTL is IPMC

EP Announce - Debugging







iBash CLI

 - show endpoint information

BCM Table Dump



Fabric QoS Debugging - CoPP CLI

 - CoPP statistics (red = dropped, green = allowed)
 - shows QoS classes configured
 - shows QoS classes/policices configured per vlan
 - shows ppf details
 - shows QoS classes configured in hardware
 - shows the QoS DSCP/dot1p policy configured for a vlan in HW
 - shows QoS DSCP/dot1p policy summary
 - shows QoS DSCP/dot1p policy in detail
 - shows T2 TCAM entries for specified group
 - shows QoS counters on each port
 - shows QoS counters on each port (internal)
 - shows QoS counters for each class for all ports

MCP CLI
 - shows the edge port config on the HIF (FEX) ports, the internal VLAN mapping and the STP TCN packet statistics received on the fabric ports
 - shows mcp information by interface
 - shows stats for all interfaces
 - shows mcp information per vlan
 - shows stats for all vlans
 - shows mcp information per msti region
 - shows stats for all msti regions

iTraceroute CLI
 - node traceroute
 - Tenant traceroute for vlan encapped source EP
 - Tenant traceroute for vxlan encapped source EP

ELAM Setup and debugging (follow commands in order)
 - starts ELAM on given ASIC
 - sets trigger for ELAM
 - sets source and destination mac addresses
 - Starts capture
 - shows capture status
 - shows report of the capture

VMM Troubleshooting
 - shows VM controllers and their attributes such as IP/hostname, state, model, serial number
 - shows hypervisor inventory of given VM controller



TOR Sync Troubleshooting







 - can see which VLAN is learn disable
 - can see which VLAN is learn disable
 - see if timer is attached on the VLAN/vrf



OpFlex Debugging
 - shows if OpFlex is online (status = 12 means OpFlex is online, remoteIP is anycast IP, intra vlan is vlan used by VTEP, FTEP IP is the iLeaf's IP)
 - check if DPA is running

 - uplinks and vtep should be in forwarding state. PC-LTL of uplink port should be non-zero
 - Check port channel type
 - if port channel type is LACP, can use this command to see the individual uplink LACP state
 - verify if the VTEP received a valid DHCP IP address

SPAN Debugging


BPDU Debugging
 - shows if BPDU Guard/Filter is enabled or disabled
 - check if the bpdu-drop stats are incrementing on the uplinks/virtual ports

VEM Misc Commands
 - show channel status
 - check port status
 - check per EPG flood lists
 - check vLeaf multicast membership
 - show packet stats
 - show packet counters

 - debug vxlan packet path
 - debug vxlan packet path
 - show above logging output









FEX Troubleshooting
 - shows all FEXs and their states
 - gives detailed stats of given FEX
 - gives environmental stats of FEX
 
 - shows FEX version
 - shows FEX fabric interface information
 - shows logging information for FEX
 - shows transceiver information for FEX
 - show FEX reset reason
 - shows FEX module information
 - shows debugging information and you can grep to find what you want
 - use to find out which service is failing the sequence and you can debug that process further



My Blog List

Networking Domain Jobs